Description
FEST Kontakt - dispersive, ready-to-use bonding bridge with added quartz aggregate.
- VERY HIGH ADHESION
- Suitable for priming all building substrates
- After application, the surface is roughened, which perfectly increases adhesion when applying subsequent coats.
- Equalises the absorbency of the substrate.
-------------------------------------
Ideal for priming before plastering works (microcement, plaster, mosaic plasters, organic plasters etc.).
FEST Kontakt is suitable for priming plasterboards, ceramic tiles, smooth trowelled concrete, plaster, OSB boards, etc.
- Ideal for use prior to future plastering work ( microcement, stucco plasters, mosaic plasters, organic plasters, etc.).
- Application with trowel.
-
Does not contain solvents.
-------------------------------------
APPLICATION: With a roller, brush, trowel, etc. It contains no solvents.
CONSUMPTION: ~1,0 kg/m2 (one coat)
PACK SIZE: 15 kg
-------------------------------------
TECHNICAL DATA SHEET:
 |
Fest Kontakt - Technical sheet (English) |
Read how to prepare the substrate before microcement application
FAQs
What is FEST Kontakt used for?
FEST Kontakt is a ready-to-use bonding bridge with added quartz aggregate. It provides excellent adhesion on smooth, difficult substrates such as concrete, gypsum boards, and ceramic tiles. It is used as a first reinforcing layer before applying microcement, decorative plasters, and other finishing compounds on walls.
How does FEST Kontakt differ from Festfloor Base?
FEST Kontakt is used to reinforce walls, while Festfloor Base is used to reinforce floors.
Can FEST Kontakt be used on ceramic tiles?
Yes. FEST Kontakt works great as a bonding layer on ceramic tile walls.
Does FEST Kontakt need to be diluted before use?
No. The product is ready to use and does not need to be diluted. Just mix it thoroughly before application.
How do you apply FEST Kontakt?
FEST Kontakt should be applied evenly with a trowel to a clean and dry substrate. When reinforcing walls with fiberglass mesh, it should be embedded in a freshly applied layer of FEST Kontakt. The drying time for one layer is approximately 4–6 hours at room temperature. All information about the product and its application can be found in the technical data sheet.
What packaging is FEST Kontakt available in?
FEST Kontakt is available in the following packaging sizes: 5 kg, 10 kg, 15 kg, and 20 kg.
How much FEST Kontakt do I need per 1 m²?
Consumption is approx. 0.7–1.0 kg per 1 m² for one coat. For two coats, it can be 1.5–2.0 kg/m².
FEST Kontakt - adhesion promoter 15 kg
€46,00