Description
The color book from the FESTFLOOR GO! palette consists of 19 samples enclosed in an elegant hard cover folder. It includes all the colors available for self-preparation in the FESTFLOOR GO! system. Eighteen colors of FESTFLOOR GO! in one place!
- 10 shades of gray
- 4 shades of fashionable beige
- 2 shades of pink
- new trends: Blue Sky / TeaTree
- and ... white!
In addition: one larger plate (9x26 cm) - to enable to see the structure of the microcement and check how the color changes depending on the selected type of light. Finished with attention to detail, hard cover, enriched with varnish - this is undoubtedly a must-have in contact with the customer.
* all samples have been finished with PU FEST 2K mat varnish.
Colors
FF1515BS BLUE SKY
FF1010PR PASTEL ROSE
FF1005CR COOL ROSE
FF1502TB TAUPE BEIGE
FF2005CB CLASSIC BEIGE
FF2002JB JULYGO BEIGE
FF1005WB WARM BEIGE
FF7044 SILK GREY
FF7032 PEBBLE GREY
FF7011 IRON GREY
FF7035 LIGHT GREY
FF7030 STONE GREY
FF9002 GREY WHITE
FF9003 SIGNAL WHITE
FF9000-n
FF7000-n
FF6000-n
FF5000-n
FF4000-n
FF1515TT TEATREE
FF3000-n
FF2000-n
Still have doubts?
Festfloor GO! Color Palette
FAQs
Can Festfloor GO! be applied directly onto tiles?
Yes, Festfloor GO! microcement can be applied directly onto old tiles, provided that they are stable, well adhered to the substrate, and in good condition. Before applying the microcement, the tiles must be properly prepared. Detailed step-by-step instructions can be found in our instructional video.
Is Festfloor GO! microcement waterproof?
Festfloor GO! microcement itself is not waterproof, but after protecting the surface with a protective varnish, the microcement surface becomes resistant to water, moisture, and dirt. In areas exposed to direct and constant contact with water (e.g., shower stalls without a shower tray), we recommend that you first completely waterproof the substrate. For bathrooms and wet areas, choose HydroFest – a microcement that is water-resistant throughout its mass.
Is Festfloor GO! microcement suitable for floors with underfloor heating?
Yes, Festfloor GO! is ideal for underfloor heating thanks to its high flexibility and thermal conductivity, which facilitates effective heat transfer to the room. Before applying the microcement, the underfloor heating system should be turned on, tested, and then turned off at least 7 days before applying the microcement.
Can I apply Festfloor GO! microcement myself, without any experience?
Yes – Festfloor GO! is a single-component, colored, ready-to-use system, which makes it user-friendly for people with no experience. However, it is a good idea to read the instructions or watch the instructional videos on our YouTube channel.
How long does microcement take to dry after application?
One coat usually takes 2–4 hours to dry at room temperature. The protective varnish can be applied 4–6 hours after the last coat of microcement has been applied.
Can I use Festfloor GO! on walls and ceilings?
Yes – the product is suitable for floors, walls, countertops, stairs, and ceilings.
What colors are available?
Festfloor GO! microcement is available in a standard palette of 22 colors. We can also prepare microcement in colors from the RAL or NCS palette on request.
How does Festfloor GO! microcement differ from other Festfloor systems?
For a detailed comparison and to choose the right product for your needs, see the dedicated article: “Comparison of Festfloor microcement systems”. There you will find a comparison of the four main systems — GO!, Life, HydroFest and TITAN — with their characteristics, applications and advantages.

COLOR BOOK FESTFLOOR GO!
€40,00