Description
By ordering this system, you will receive a ready-to-use set of pro-basic products needed to create a 10 m2 FESTFLOOR GO surface! This kit is suitable for finishing floors, walls and countertops.
-------------------------------------
THE KIT INCLUDES:
THE KIT INCLUDES:
- FESTFLOOR GO! microcement- 15 kg of material sufficient for two layers
- FESTGrunt - 1 kg of material sufficient for one layer
- PU FEST 2K sealer - 1.2 kg (1.0+0.2kg) - for indoor use
-------------------------------------
CONSUMPTION:
FESTFLOOR GO! - first coat: approx 0,7-1,0 kg/m², second coat: approx 0,5-0,7 kg/m²
FESTGrunt - approx 0,1-0,3 kg/m²
PU FEST 2K - approx 0,1-0,15 kg/m²
-------------------------------------
FESTFLOOR GO! is a completely new quality of microcement. It is an innovative product, which makes it possible to speed up work on the construction site and facilitates the execution of microcement floors and walls. After opening the packaging, you receive a ready-coloured microcement which you can start applying immediately.
FESTFLOOR GO! is suitable for interiors and exteriors, both dry and wet zones and rooms heavily exposed to foot traffic. It is characterised by its liquid consistency, high durability and very high adhesion to the substrate.
FESTFLOOR GO! leaves a smooth and velvety finish with a fine and subtle microcement texture. FESTFLOOR GO! microcement is hygienically certified by the PZH.
FESTFLOOR GO! is suitable for interiors and exteriors, both dry and wet zones and rooms heavily exposed to foot traffic. It is characterised by its liquid consistency, high durability and very high adhesion to the substrate.
FESTFLOOR GO! leaves a smooth and velvety finish with a fine and subtle microcement texture. FESTFLOOR GO! microcement is hygienically certified by the PZH.
Please choose carefully the color of the product. Each packet is prepared and coloured individually to the customer's order, therefore return of unused products is not possible.
 |
WIDE COLOUR PALETTE Festfloor Go! is available in a wide range of colours. |
 |
APPLICATION Floors, stairs, bathroom floors and walls, worktops, |
 |
HIGH ABRASION RESISTANCE
Due to the lack of joints, it is easy to clean. |
-------------------------------------
TECHNICAL DATA SHEETS:
-------------------------------------
VIEW OUR VIDEO ABOUT FESTFLOOR GO! MICROCEMENT:
Colors
FF1515BS BLUE SKY
FF1010PR PASTEL ROSE
FF1005CR COOL ROSE
FF1502TB TAUPE BEIGE
FF2005CB CLASSIC BEIGE
FF2002JB JULYGO BEIGE
FF1005WB WARM BEIGE
FF7044 SILK GREY
FF7032 PEBBLE GREY
FF7011 IRON GREY
FF7035 LIGHT GREY
FF7030 STONE GREY
FF9002 GREY WHITE
FF9003 SIGNAL WHITE
FF9000-n
FF7000-n
FF6000-n
FF5000-n
FF4000-n
FF1515TT TEATREE
FF3000-n
FF2000-n
Still have doubts?
Festfloor GO! Color Palette
FAQs
Can Festfloor GO! be applied directly onto tiles?
Yes, Festfloor GO! microcement can be applied directly onto old tiles, provided that they are stable, well adhered to the substrate, and in good condition. Before applying the microcement, the tiles must be properly prepared. Detailed step-by-step instructions can be found in our instructional video.
Is Festfloor GO! microcement waterproof?
Festfloor GO! microcement itself is not waterproof, but after protecting the surface with a protective varnish, the microcement surface becomes resistant to water, moisture, and dirt. In areas exposed to direct and constant contact with water (e.g., shower stalls without a shower tray), we recommend that you first completely waterproof the substrate. For bathrooms and wet areas, choose HydroFest – a microcement that is water-resistant throughout its mass.
Is Festfloor GO! microcement suitable for floors with underfloor heating?
Yes, Festfloor GO! is ideal for underfloor heating thanks to its high flexibility and thermal conductivity, which facilitates effective heat transfer to the room. Before applying the microcement, the underfloor heating system should be turned on, tested, and then turned off at least 7 days before applying the microcement.
Can I apply Festfloor GO! microcement myself, without any experience?
Yes – Festfloor GO! is a single-component, colored, ready-to-use system, which makes it user-friendly for people with no experience. However, it is a good idea to read the instructions or watch the instructional videos on our YouTube channel.
How long does microcement take to dry after application?
One coat usually takes 2–4 hours to dry at room temperature. The protective varnish can be applied 4–6 hours after the last coat of microcement has been applied.
Can I use Festfloor GO! on walls and ceilings?
Yes – the product is suitable for floors, walls, countertops, stairs, and ceilings.
What colors are available?
Festfloor GO! microcement is available in a standard palette of 22 colors. We can also prepare microcement in colors from the RAL or NCS palette on request.
How does Festfloor GO! microcement differ from other Festfloor systems?
For a detailed comparison and to choose the right product for your needs, see the dedicated article: “Comparison of Festfloor microcement systems”. There you will find a comparison of the four main systems — GO!, Life, HydroFest and TITAN — with their characteristics, applications and advantages.
Kit FESTFLOOR GO! Basic microcement - 10 m²
€135,00